POLAR SEAL 1 L

Autoglym's Polar Seal is a protective coating formulated specifically for application via a high-pressure cleaner using the Polar Blaster. It leaves a water-repellent layer on the paint that causes water to form pearl-shaped droplets on the surface, which makes the car dry faster. Simply spray onto a clean & wet vehicle, then rinse and dry to a high gloss finish.

This Polar Seal has the following working method:

Before you start, check that the bodywork and wheels are cool to the touch and that they are not directly exposed to the sun;
We recommend using a snow foam like Polar Blast to gently loosen the dirt and then using Polar Wash to wash any mud or dirt off your paint;
You only need a small amount of Polar Seal. Pour up to 40ml (four full caps) into your spray bottle, then add at least 200ml of water. This amount is normally sufficient to treat your vehicle. There is no benefit in using more than 40 ml, as excessive application of the product can lead to a worsened result;
Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, but do not apply to the windshield;
Rinse your car well and dry it to a high gloss finish protected by a water repellent coating. The car must be dried with a cloth and must not be turned on