UNIMOTIVE HIGH PRESSURE VALVE TR801HP (L=48MM) VALVE HOLE 15,7MM (1PC)

Use proper valve for correct application rubber tubeless valves must be resistant to a tire pressure of a maximum of 4.5 bar. Sinatec Unimotive valves have been tested here and amply meet this requirement. However, it is advisable to think about the application of the vehicle for assembling a valve in a rim. Heavy loaded vehicles such as vans and trailers already have a relatively high tire pressure as standard. By loading and driving, the pressure in the tire can rise considerably, leaking the valve and drain the tire. SINATEC advises to use steel valves for these types of vehicles, and uses the rule, everything above the 6-ply band must be provided with a high pressure valve. Steel unimotive valves are guaranteed to a pressure of 6.9 bar. Steel valves can be mounted on all rims and give the wheel a beautiful optical appearance. Unimotive steel valves come in the color aluminum and black. Sinatec delivers rubber tubeless valves with a length of 33, 43, 49 or 61 millimeters. Always use the valve with the length recommended by the car or rim manufacturer. Because the wheel revolves around, the valve is subject to centrifugal forces. The longer the valve, the greater the power that can rise to & EACUTE; & EACUTE; N kilogram. The more power on the valve, the greater the chance of leakage and a deflating band.