FRONT & REAR CAMERA INTERFACE JEEP UCONNECT 8.4 2018> (1ST)

General
Front & Rear camera interface Jeep Uconnect 8.4 -2018>. This interface allows you to add an aftermarket reverse camera and/or front camera to the factory screen. .


Features
# Auto switching back up camera
# Auto switchting fromt camera iniput
# No programming required
# Setting menu to adjust brightness/contrast/saturation
# Setting menu to adjust front camera time to show
# Setting menu to adjust position of parking lines


CAMERA FEATURES

Parking guidelines
In the camera image on screen parking guidelines can be displayed. This makes it much easier to determine the distance to the object you are driving towards. The guidelines are adjustable horizontal as well as vertical so the lines can be adjusted to the car.

Intelligent Park Assist System (IPAS)
The interface have also the Intelligent Park Assist System (iPAS). With this function the guidelines will respond on the steering wheel position. The guide lines are adjustable horizontal and vertical via the interface OSD menu.




PACKAGE CONTENTS
The following is provided in the set:
- Main interface board (QCPASS1314): 1x
- Small board (DODGE-5CH-EX-V1.1): 1x
- Multi cable (HARETC03035): 1x
- CAN P&P (HARETC0091): 1x
- FFC cable short (FFCABL0082): 1x
- FFC cable long (FFCBAL0039): 1x
- Remote (REMOTE0001): 1x
- Infrared cable (HIRCAB0002): 1x
- Button (HARETC0001): 1x
- Installation- & user instructions
- Warranty


NOTES
- We recommend that the installation will be performed by a qualified specialist
- iPAS not compatible with all models (limited)

Geschikt voor: